================================================================================
                                样例使用说明
                             Sample Description
================================================================================
功能描述：
此样例演示了TIM1的输出比较模式。将捕获/比较通道1（CH1）的输出映射到PA5，开启捕获
/比较通道1（CH1）并设置为比较输出翻转模式。

Function descriptions:
This example demonstrates the output comparison mode of TIM1. Map the output of 
capture/compare channel 1 (CH1) to PA5, turn on capture/compare channel 1 (CH1),
and set it to compare output flipping mode.
================================================================================
测试环境：
测试用板：PY32F002B_STK
MDK版本： 5.28
IAR版本： 9.20
GCC 版本：GNU Arm Embedded Toolchain 10.3-2021.10

Test environment:
Test board: PY32F002B_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU，并运行
2. PA5 翻转频率为0.5hz

Example execution steps:
1. Compile and download the program to MCU and run it
2. PA5 flip frequency is 0.5Hz
================================================================================
注意事项：

Notes:

================================================================================